How-to Power Cycle StreamSpot ONE Encoder

 

To reboot the StreamSpot ONE encoder begin by holding down the power button highlighted below. After the blue light goes off, wait at-least 5-seconds and then press the power button again to start the encoder.

streamspot-one-power-cycle.png 

Have more questions? Submit a request

Comments

  • Avatar
    Brad Maunders

    Worthless if working remotely. This needs to be set up to follow the purpose of the box...meaning being able to not be present for the streaming and the box does it based on the schedule. Why have the box if I have to be present all the time. Set up the web that will allow the box to be rebooted remotely and once rebooted, we see it again online. If we don't see it, then there is a problem with the box and we have to physically go in and check it out.