When swapping between camera feeds while using Axis cameras you may notice green boxes and other artifacts. To stop this from occurring your Axis cameras should be set to “baseline”, not “main”. Setting to baseline eliminates the green “boxes” that occur when switching between shots, or when the stream starts. To set your cameras to baseline, follow the guide below.
1. Head to the IP address of your camera and log in.
- To find your camera IP address and log in, see this article.
2. Once logged in, click " Setup" in the top right corner.
3. Under Video&Audio, click "Video Stream". From here, simply set h.264 profile to Baseline and save your change.
Comments