Troubleshooting Monarch Audio Sync Issue(s)

If you are experiencing audio issues (delay, sync, etc.) using a Matrox Monarch, try one or more of the solutions below.

These suggestions require access to the Command Center.  Audio Settings can be found under the Settings drop-down menu.

Remember to click Apply after a change has been made.

 

Solution A: Change the Audio Source

  • Select a desired source (Analog, HDMI).  Some additional settings may become greyed out or unavailable with this change.

Solution B: Switch the Audio Sample Rate

  • Set the Audio Sample Rate to 44 kHz.

Solution C: Lower the Audio Bit Rate

  • Set the Audio bit rate to 96 kb/s.

 

Have more questions? Submit a request

Comments